figure 3D model for FDM 3D printers
UPGRADE TO A FULLY POSEABLE ACTION FIGURE NOW: https://3dzipguy.gumroad.com/l/wrglk
Use 3mm x 100mm zipties for 1/12 scale
Use 5mm x 20mm (or bigger) zipties for 1/6 scale
Theoretically can be scaled up to 1:1, but make sure you can find big enough zipties for it, or use other alternative materials that will serve the same purpose of holding the head, the neck and chest together.
3D PRINTING SETTINGS
Layer height 0.05mm- 0.15mm
Not recommended for resin 3D printing, due to the brittleness of common resins available. Also the tolrenaces might be affected by the shrinkage of cured resin.
Zip tie sizes required:
100% scale (1/12 scale Approx. 6.5in)
3mm x 150mm
4mm x 150mm
140% scale (Approx. 9 in)
4mm x 150mm
5mm x 150mm - 200mm
200% - 185% (1/6th scale)
6mm x 30mm
8mm x 500mm
By purchasing this file, you agree to NOT sell or redistribute the contents of this product. This fan art is for personal use only.
You cannot mass produce and sell the 3D printed object.
If you choose to make any multimedia content using this product, attribution is very much appreciated
Not recommended for small children. This product contains sharp and small parts that are choking hazards. Maker is not responsible for any untoward incident that might occur as a result of non-compliance of this warning.